Trusă de centrat ambreiaj ZR-36UCAS - ZIMBER -TOOLS

Trusă de centrat ambreiaj  ZR-36UCAS - ZIMBER -TOOLS.


Universal clutch alignment tool for front wheel drive vehicles.


-Suitable for most vehicles under 5 tons with a single plate clutch.
-This clutch alignment tool is suitable for easy alignment of single clutch plates
-Also suitable for flywheels with no pilot bearing
-Universal clutch alignment tool for front wheel drive vehicles
-Nylon components with steel main shaft.
-Allows the clutch plate and the pressure plate to be assembled on the bench, making clutch changes a one handed operation.
-Easy alignment and installation on the work bench
-Fits 90% of cars and light vans.
-Not suitable for minis or vehicles with double plate clutches
SPECIFIC SPECIFICATIONS
Suitable for single plate clutches
 suitable for flywheels with no pivot bearing
 Fast to fit and remove
 Universal applications for a wide variety of vehicles
 Size of collets - 14mm to 28mm across 3 adaptors

SIMPLE TO USE

Place clutch plate over pressure plate on workbench, insert tool through centre and push down.
Tighten the small wheel to expand the collet which is inside the clutch plate.
Tighten the funnel wheel until contact is made with the pressure plate then turn both plates over.
Align both plates together by sliding them sideways until both edges are parallel, then firmly tighten the funnel shaft, holding both plates together
Install the both plates to the flywheel, then remove the tool by loosening the small wheel.