Trusă de reparat filet M5,M6,M8,M10,M12 - 131 bucati, ZK-232

Trusă de reparat filet  M5,M6,M8,M10,M12 - 131 bucati, ZK-232. 
-trusa contine kituri pentru reparat urmatoarele filete:M5,M6,M8,M10,M12. 
-inlocuieste un filet rupt la aceeasi dimensiune 
-contine 131 bucati. 
 


Product Description. 
Manufactured from chrome vanadium steel for strength and durability. 
-Ideal for restoring damaged threads in steel, cast, iron and aluminum. 
-Suitable for engine repair and other automotive applications. 
-Simple and easy to use :- 
Drilling - clear the damaged threads with a standard drill. (to repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required. 
Check - check that the thread and pitch of the tap and the bolt match 
Tapping - use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil) 
Install the insert - place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface.

Don't work against the thread direction as the tang could break 
Tang removal - After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang.

Due to the narrow and exact tolerances the new thread normally is stronger than the original ones. 
Set includes the following :- 
5 x installation tools 
5 x break pin tools 
5 x twist drills 
1 x hex key 
5 x taps 

110pc wire thread inserts - 
M5 x 0.8 x 6.7mm 
M6 x 1.0 x 8.0mm 
M8 x 1.25 x 10.8mm 
M10 x 1.5 x 13.5mm 
M12 x 1.75 x 16.3mm